DUPLEX 2205 UNS S32205 UNS S31803

Property and Application 

Duplex 2205 Alloy UNS S32205, S31803, also known as Duplex, Alloy 2205, Stainless Steel 2205, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, combines the favorable qualities of a ferritic alloy with those of an austenitic alloy. Duplex Alloy, are twice as strong as either austenitic or ferritic stainless steels. They achieve good toughness and ductility, somewhere between the two. Their corrosion resistance is also very good, assuming comparable levels of Chromium, Molybdenum and Nitrogen in selected compositions. One important advantage over austenitic stainless steels is their resistance to stress corrosion cracking. Yet they are significantly more cost effective, and less prone to price variability, due to their lower nickel content.

COBALT 6B ALLOY UNS R30016

Property and Application

Cobalt 6B Alloy UNS R30016, also known as Stellite 6B, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets. Is a cobalt-based alloy with outstanding resistance to most types of wear. Its wear resistance is inherent and not the result of cold working, heat treating, or any other method. Applications: Half Sleeves and Half Bushings in screw conveyors, tile making machines, rock crushing rollers, and cement & steel mill equipment. Stellite® 6B is well suited for valve parts, pump plungers, doctor blades, knives, wear plates and bearings.
Stellite® is a registered trademark of Deloro Stellite Company.

DUPLEX 2507 UNS S32750

Property and Application

Duplex 2507 UNS S32750, also known as Super Duplex 2507, Duplex 2507 Alloy, Stainless Steel 2507, Super Duplex Alloy, Alloy 2507, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel, this high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.

DUPLEX 2105 UNS S32101

Property and Application 

Duplex 2101 Alloy UNS S32101 also known as Duplex, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, Alloy 2101, LDX 2101 Stainless Steel the enhanced mechanical strength of LDX 2101 can provide significant cost savings to the end user. LDX 2101 was designed to be a low nickel general purpose substitute for 304 and 304L.

HASTELLOY C-276 ALLOY UNS N10276

Property and Application

Hastelloy C276 Alloy UNS N10276, also known as Alloy C276, Inconel C-276, Hastelloy C, Hastelloy Alloy C-276, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a nickel-molybdenum-chromium superalloy with a tungsten addition designed to have excellent corrosion resistance in a wide range of harsh environments. The high contents of nickel and molybdenum make the nickel steel alloy especially resistant to corrosion by pitting and cracking in reducing environments, while chromium transmits resistance to oxidizing.

HASTELLOY C-22 ALLOY UNS N06022

Property and Application.

Hastelloy C22 UNS N06022, also known as Alloy C22, Alloy C-22, Hastelloy Alloy C-22, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a versatile nickel-chromium-molybdenum-tungsten austenitic alloy with improved resistance to pitting, cracking and corrosion corrosion. The Hastelloy C-22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, chlorides Ferric and cupric, sea water, brine and many chemical solutions mixed or contaminated, both organic and inorganic.

HASTELLOY B-3 ALLOY UNS N10675

Property and Application

Hastelloy B-3 Alloy UNS N10675 also known as Alloy B3, Alloy B-3, Hastelloy Alloy B-3, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a nickel-molybdenum alloy with excellent corrosion resistance, as well as superior thermal stability than the B-2 alloy.The B-3 alloy also supports sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media. In addition, this nickel alloy has excellent resistance to hydrochloric acid at all concentrations.

HAYNES 25 ALLOY UNS R30605

Property and Application

Haynes 25 Alloy UNS R30605 also known as Cobalt Alloy 25, Alloy L605, Stellite 25, Udimet L605, Alloy L-605, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a cobalt-chromium-tungston-nickel alloy, ir has good formability, high strength to 1500°F (816°C), and good oxidation resistance to 2000°F (1093°C). The material also has good sulfidation resistance and resistance to wear and galling. Alloy L605 is used in applications requiring moderate strength and good oxidation resistance at high temperatures. L605 is non-magnetic. It has excellent resisitance to the hot corrosive atmospheres in jet engine applications.

INCOLOY 020 ALLOY UNS N08020

Property and Application

INCOLOY Alloy 020 UNS N08020 also known as Inco 20 Alloy, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, exhibits excellent corrosion resistance in chemical environments that contain sulphuric acid, chlorides, phosphoric acid and nitric acid. It is easy to fabricate this alloy to form mixing tanks, heat exchangers, pickling equipment etc.

INCOLOY 330 ALLOY UNS N08330

Property and Application

.Incoloy 330 Alloy UNS N08330 also known as Alloy 330, RA330, Nicrofer 3718, Inco 330 Alloy, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is high in nickel and chromium that provides good resistance to carburization, oxidation, and nitridation,is welded easily by all conventional processes; it can be formed hot (between 1750-1200° F) and cold. Incoloy 330 Alloy is used for industrial heating furnaces, muffles, retorts, boxed and baskets.

Incoloy 330 Alloy is used for industrial heating furnaces, muffles, retorts, boxed and baskets.

INCOLOY 800H ALLOY UNS N08810 / N08811

Property and Application

Incoloy 800H Alloy UNS N08810 N07811 also known as Incoloy Alloy 800HT, Alloy 800, Alloy 800H, Inconel 800, Alloy 800HT, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, are nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloy are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT.

  INCONEL 625 ALLOY UNS N06625

Property and Application

Inconel 625 Alloy UNS N06625 also known as Alloy 625, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a nickel-chromium-molybdenum alloy with added niobium. This provides high strength without a heat treatment of reinforcement. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. It is used in chemical treatment, aerospace and marine engineering, pollution control equipment and nuclear reactors.

MONEL ALLOY 400 UNS N04400

Property and Application

Monel Alloy 400 UNS N04400 also known as Monel 400 Alloy, Alloy 400, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a nickel-copper alloy very resistant to water and steam at high temperatures, as well as salts and caustic solutions, This nickel alloy features features such as good corrosion resistance, good weldability and high strength. A low rate of rapid-flowing salt or brackish water corrosion combined with excellent resistance to stress corrosion cracking in most freshwater and its resistance to a variety of corrosive conditions led to its widespread use in marine and other applications Solutions of non-oxidizing chloride. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids.

Because of its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

NICKEL 200 ALLOY UNS N02200

Property and Application

Nickel 200 Alloy UNS N02200 also known as Nickel Alloy 200, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, can be used include processing and storage of chemicals, production of synthetic fibers and processes in which sodium hydroxide and fluorine are used. Other applications include the aerospace and defense industry as well as food processing, 200/201 nickel has exceptional resistance to caustic alkalis at various temperatures and concentrations.

NICKEL 201 ALLOY UNS N02201

Property and Application

Nickel 201 Alloy UNS N02201 also known as Nickel Alloy 201, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, can be used include processing and storage of chemicals, production of synthetic fibers and processes in which sodium hydroxide and fluorine are used. Other applications include the aerospace and defense industry as well as food processing. 200/201 nickel has exceptional resistance to caustic alkalis at various temperatures and concentrations.

NITRONIC 50 ALLOY UNS S20910

Property and Application

Nitronic 50 Alloy UNS S20910 also known as Nitronic 50 Stainless Steel, Alloy 50, Alloy XM-19, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is an austenitic grade providing corrosion resistance greater than other typical austenitic grades such as SS 316/316L and 317/317L. It is also capable of nearly double the yield strength of similar austenitic grades. Nitronic 50 stainless steel offers yield strength three times that of 316.

AL-6XN STAINLESS STEEL UNS N08367

Property and Application

AL-6XN UNS N08367 Stainless Steel, also known as Súper Alloy AL6XN, AL-6XN alloy, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets,  AL6XN alloy, is a highly corrosion resistant alloy making it a better choice than other super-austenitic stainless steels such as 254 SMO® or 904L.  It outperforms conventional duplex stainless steels, such as 2205 or 2507, and is a cost-effective alternative to more expensive nickel-based alloys in applications where excellent formability, weldability, strength, and corrosion resistance are essential.

310 STAINLESS STEEL UNS S31000

Property and Application

310 Stainless Steel UNS S31000 also known as Alloy 310, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, combining excellent high temperature properties with good ductility and weldability, is designed for high temperature service. It resists oxidation in continuous service at temperatures up to 1150°C provided reducing sulphur gases are not present. It is also used for intermittent service at temperatures up to 1040°C.

310H STAINLESS STEEL UNS S31009

Property and Application

310H Stainless Steel UNS S31009 also known as Alloy 310H, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets,has a carbon content restricted to exclude the lower end of the 310 range. This makes 310H the grade of choice for high temperature applications. This steel has good resistance to oxidation at temperatures of up to 1040°C (1904°F) in intermittent service and 1150°C (2102°F) in continuous service. It is widely used in environments where sulfur dioxide gas is present at high temperatures.

317L STAINLESS STEEL UNS S31703

Property and Application

317L Stainless Steel UNS S31703 also known as Alloy 317S, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration.

321 STAINLESS STEEL UNS S32100

Property and Application

321 Stainless steel UNS S32100 also known as Alloy 321. Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is a heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000°-1600°F temperature range, 321 stainless is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800°-1500°F. Type 321 is similar to type 304 stainless but with a titanium addition of at least five times the carbon content.

330 STAINLESS STEEL UNS N08330

Property and Application

330 Stainless steel UNS N08330 also known as Alloy 330, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, is an austenitic heat and corrosion resisting alloy that offers a combination of strength and resistance to carburization, oxidation and thermal shock. This alloy was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry. Carburization and oxidation resistance to about 2100°F are enhanced by the silicon content of the alloy.

WASPALLOY ALLOY UNS N07001

Property and Application

Duplex 2101 Alloy UNS S32101

Property and Application

Duplex 2101 Alloy UNS S32101 also known as Duplex, Alloy 2101, LDX 2101 Stainless Steel, Available in Screws, Hex Head Screws, Set Screws, Nuts, Bolts, Nails, Special Screws, Studs, Fasteners, Threaded Bars, Plates, Sheets, Tubes, Pipes, Tubing, Round Bars, Flat Bars, Bars Hexagonals, Flanges, Valves, Inserts in Graphite Sheets, the enhanced mechanical strength of LDX 2101 can provide significant cost savings to the end user. LDX 2101 was designed to be a low nickel general purpose substitute for 304 and 304L.